Daytona GBB Adapter

Adapter Parts to use a GBB HopUp Rubber instead of the proprietary HopUp Rubber.

Link to the V1: https://www.thingiverse.com/thing:6857857
The V1 Version made use of a AEG HopUp Rubber. The Rubber has failed after around 1500 shots, the failure was sudden and the BB's had extrem over- or underhop.
The weakpoint was the HopUp Rubber, my thesis is that the pressure is too high and the rubber has not enough support. The rubber ripped and let the pressure out of the chamber or made turbulent air.

After some measuring and tinkering with my new 1911, i looked a bit more into GBB HopUp Rubbers and discovered that they have the same diameter as the original Daytona Rubbers. I edited my V1 design and made this V2 design, the biggest difference is that there is no more need to glue anything.

I RECOMEND THE PLUNGER SPRING MOD TO BE INSTALLED!
I had some feeding problems, but it could be because i use a different (stiffer) recoil spring.

You can cut up your original bucking if you don't have a