dead in space

Project: Space skeletonPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #13 (1.12mm) swap to Gray At layer #19 (1.6mm) swap to White for the rest.