Thingiverse

Deadeye Dan Sharpened

by gatormustang

5 Downloads

4 Likes

0 Makes

This is a sharpened version of Dead Eye Dan scanned by lyte3d and sharpened by Mrcellophane1978. I have published them here to have all of the sharpened scans by lyte3d in one location.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Deadeye Dan Sharpened?

Any FDM printer should handle Deadeye Dan Sharpened just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Deadeye Dan Sharpened need supports when printing?

Yes, Deadeye Dan Sharpened will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Deadeye Dan Sharpened available in?

Deadeye Dan Sharpened is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Deadeye Dan Sharpened free to download?

Yes, Deadeye Dan Sharpened is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Deadeye Dan Sharpened

Add to Collection