Deadpool & Detective Pikachu - HueForge

ATENCIÓN: arte original creado por el usuario crestren en Reddit, créditos a él. Yo solo lo he pasado para poder imprimirlo en 3D a través de HueForge. ----------------------------- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 142.96x199.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA i3D Tested White Transmission Distance: 5 PLA i3D Tested Black Transmission Distance: 0.6 PLA i3D-Tested Red Transmission Distance: 5.5 PLA i3D-Tested Yellow Transmission Distance: 6.5This print uses 4 unique filaments Swap Instructions: Start with White At layer #2 (0.24mm) swap to Black At layer #8 (0.72mm) swap to Red At layer #17 (1.44mm) swap to Yellow At layer #24 (2mm) swap to White for the rest.