Slicer Discord
Deadpool Hueforge – Modelo 3D imprimible de MakerWorld MakerWorld
Hueforge & Lithophane

Deadpool Hueforge

415 Descargas
247 Likes
281 Makes
Ver Modelo
I created a stand that will work great as well:https://makerworld.com/en/models/1025425#profileId-1007499 2 versions included. “1” and “1b”. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmIf changing size . . . only change X and Y, not Z. The Model is 156.8x235.2mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used:PLA Bambulab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Red Transmission Distance: 4PLA Gray Transmission Distance: 3PLA White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to RedAt layer #13 (1.12mm) swap to GrayAt layer #17 (1.44mm) swap to White for the rest. Project: Deadpool 1b.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmIf changing size . . . only change X and Y, not Z.The Model is 200x300mm in sizeYou may print at higher layer
Categoría
Hueforge & Lithophane
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Baja confianza
¿Por qué?
impresión muy grande
Pieza única Puede necesitar escalado
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 3/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Cama mín.
300 mm (Muy grande)
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

DMurr5050 también publica en

23 modelos adicionales en 1 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección