Deadpool Hueforge

I just happened to cut mine out but the print is for a 200x200 Hueforge. Make sure to follow swap instructions. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.6mmThe Max Depth is 2.4mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Red At layer #7 (0.68mm) swap to Black At layer #11 (1mm) swap to Red At layer #16 (1.4mm) swap to Jade White for the rest.