Deadpool HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 170x234.75mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mm Filaments Used: PLA PolyLite Black Transmission Distance: 1.7 PLA Elegoo Brown Transmission Distance: 5 PLA Sunlu Red Transmission Distance: 6 PLA DURAMIC 3D Matte Skin Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.72mm) swap to Brown At layer #9 (0.88mm) swap to Red At layer #19 (1.68mm) swap to Matte Skin for the rest.