Deadpool Style Bookmark Hueforge

by TheMiniSmith3D · Hueforge & Lithophane

33 Downloads

46 Likes

15 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 60x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.3mmThe Max Depth is 3mm and the Actual Depth is 3.1mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #21 (1.76mm) swap to Scarlet Red At layer #26 (2.16mm) swap to Ash Gray At layer #30 (2.48mm) swap to Ivory White for the rest. Boost MeBoost me up for free if you will like to see more of this! :)