Deadpool vs. Wolverine Hueforge

Project: Deadpool vs WolverineV1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x150.05mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Pro Black Transmission Distance: 0.3 PLA PolyLite Steel Grey Transmission Distance: 1 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite Pro White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Steel Grey At layer #17 (1.44mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest.