Deadpool vs Wolverine

Project: Deadpool and Volwerine.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x149.98mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #8 (0.72mm) swap to Black At layer #9 (0.8mm) swap to White At layer #23 (1.92mm) swap to Black At layer #24 (2mm) swap to Red for the rest.