Deadpool & Wolverine - Hueforge

Project: Wolverine-Deadpool.hfpPrint at 100% infill with a layer height of 0.12mm with a base layer of 0.2mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 3.2mm and the Actual Depth is 3.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique