Slicer Discord
Death Note Cover Hueforge – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

Death Note Cover Hueforge

9 Downloads
28 Likes
6 Makes
Go to Model
Hello Everyone,This is the cover of Death Note's rules printed with 0.2mm nozle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 116.38x179.9mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 0.88mmFilaments Used:PETG JAYO Black Transmission Distance: 0.3PETG JAYO White Transmission Distance: 6This print uses 2 unique filamentsSwap Instructions:Start with BlackAt layer #3 (0.32mm) swap to White for the rest.
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
2 colors
Single piece 2 colors / AMS
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PETG
Min. bed size
50 mm (Small)
Colors
2 (AMS/MMU recommended)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection