Slicer Discord
Death Note Rules Page 1 – 3D-printbaar model van MakerWorld MakerWorld
Hueforge & Lithophane

Death Note Rules Page 1

54 Downloads
52 Likes
24 Makes
Model downloaden
Hello Everyone,This is the first page of Death Note's rules printed with 0.2mm nozle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 116.45x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 0.88mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO White Transmission Distance: 6This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #3 (0.32mm) swap to White for the rest. Feel free to share the results! :D
Categorie
Hueforge & Lithophane
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
grote print
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 2/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PETG
Min. bedgrootte
180 mm (Groot)
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie