deathmoth

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Generic red Transmission Distance: 5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Cotton White Transmission Distance: 1.5This print uses 4 unique filaments Swap Instructions: Start with Charcoal Black At layer #13 (1.12mm) swap to red At layer #17 (1.44mm) swap to Sunrise Orange At layer #21 (1.76mm) swap to Cotton White for the rest.