Deburr tool handle

A holder for deburring tool blades. The handle I had allowed the blade to rotate, which is great for deburring tools but inconvenient for deburring edges of parts, which is primarily what I use these tools for. This handle is designed with an undersized hole, so the blade can be inserted while heated, and melted into place for a rigid grip. 4 walls, 30% infill. Fuzzy skin makes a nice grippy texture with point distance and thickness both set to 0.1Recommended material is PLA for easier installation. To install blades:I recommend first grinding or filing a flat into the base of the blade. This is probably not necessary but it should help the blade to stay in place without rotating. Then clamp the blade into a vice, or hold with pliers while heating with a small torch or heat gun. Be careful not to let the blade get too hot. Too much heat can ruin the heat treat of the blade and cause it to dull quickly. If it starts turning red, you have heated it too much. This is why I recommend print