Deburring tool handle

A simple holder for 3.2mm deburring blades.The handle is one piece. The tip is split by a small slot, so the blade can be pushed in and will snap in place. The ring keeps the two halves together.There are model files for the handle that have a slightly looser fit, in case the blade is not rotating well.I also added XY scaled files of the rings, so you don't have to adjust scale in the slicer.--> I'd recommend to try the 0.2mm play version of the handle, and the +2% scaled ring first.Let me know how it works!Printing:The handle is printed flat, with support under the threaded section (see photo).The ring is printed standing up.I printed in PETG, 0.2 layer, 0.4 nozzle and 0.6 nozzle work fine.3 perimeters wall, 20% cubic infill (2 perimeters and 15% seems to be strong enough too).If the fit of the tool or ring is not right, select one of the alternative files.Assembly:The slot in the handle is only 0.2mm wide. Depending on the accuracy of your printer you may need a knife to open