Decent Accessory Shelf

Was inspired by some other accessory holders I've seen but didn't need one that holds a portafilter.

Front slot is meant for a puck screen, and it will hang slightly off the edge to be easier to pick up. The funnel fitting nicely on top was a happy accident.

Middle was sized to fit the Normcore tamper but should still fit other tampers for a 58mm basket.

Used the cone from the stand from the 9 Prong WDT on the back side so I won't need a separate stand anymore.

Screw holes are spaced to fit a DE1PRO; not sure if the hole alignment is the same on the XL/XXL. M3x12 screws worked nicely for me to attach it in place of the stock screws.