Slicer Discord
Deck Box w/ Dice Tray and Divider – 3D-Druckmodell von Creality Cloud Creality Cloud

Deck Box w/ Dice Tray and Divider

von
0 Downloads
0 Likes
0 Makes
Zum Modell
The box is big enough to hold approximately 110 single sleeved cards. There are 4 slots on each face of the deck box that can fit the Gamegenic slide cases or the Ultra Pro mini snaps. There are 4 holes for 5x3mm magnets on the lid and 4 holes on the base that can hold 2 x 5x3mm magnets. Also on the bottom of the token tray and inside of the lid there are 2 holes each for 10x2mm magnets meant to allow the token tray to sit on top of the lid and keep it in place.The side panels are 95.6mm x 69.6mm x 5.6mm if you want to create a blank panel or something with a logo.
Quelle
Creality Cloud
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
2 Farben
Einteilig 2 Farben / AMS Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Farben
2 (AMS/MMU empfohlen)
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen