DeepCool CH260 Case Vertical Stand

用于九州风神CH260机箱的竖装底座，让CH260化身为CH270，但底部拥有更好的进气。我使用PLA 3层墙的参数打印，已经拥有足够的坚韧程度，如果担心强度可使用PETG打印。此外，欢迎前往我的主页下载我所画的CH260底部进气防尘。组装所需配件：M3x5MM热熔螺母 x10 M3x8MM螺丝 x8 M3x10MM沉头螺丝 x4 M3x18MM沉头螺丝 x4 This vertical stand is designed for the DeepCool CH260 case, effectively transforming the CH260 into a CH270, but with superior airflow at the bottom.I printed this part using PLA with a 3-wall line count and found it to be sufficiently robust. If you are concerned about strength, you can opt to print with PETG.Also, feel free to visit my profile to download the dust filter I designed for the CH260's bottom intake.Assembly Hardware Required:M3x5MM Heat-set Inserts x10 M3x8MM Screws x8 M3x10MM Countersunk Screws x4 M3x18MM Countersunk Screws x4