Deer 220x220

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 220x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BL basic Red Transmission Distance: 4 PLA BL basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #11 (0.96mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #17 (1.44mm) swap to Jade White for the rest.