Dehydrator Spool Holder/Roller

Hardware:
1 608 RS bearing. Hold the bearing by the center and try spinning it. Should spin more than 3 times. If not, there's too much grease and you need to take some out. Not necessary if too much trouble)

Optional (3 626ZZ bearings, but I think it'll add friction rather than help it)
3 M5 nuts
1 M5 x 10 socket head cap screw (used to do pull-thru method to seat nut)
3 M5x35 any kind of bolt (maybe longer?)
3 M3x10 tapered bolts
1 M8 x 20 bolt
1 M8 nut

Material:
ABS, NYLON, PC. (Put a box over you ender 3 after the printer starts printing. The reason why you can't use PLA or PETG is that it'll start to deform in the dehydrator.

Supports:
you will need tree supports for the spool_adapter_normal and the filament_roller_top.

Assembly:
You will want to pull the nuts through the spool_adapter_normal using the M5x10 bolt. There are 3 spots for the nuts.

Put the bearing in the filament_roller_top and then cover it using filament_roller_bottom.

Take the M8 bol