Deltaprintr Replacement Carriages

The short: Replaces Deltaprintr stock carriages with stronger and cheaper to replace plates...

The long:
So if you own a Deltaprintr printer from Deltaprintr... They don't sell them anymore btw... You'll know that if you have serviced the printer that the carriages which are the orange little plates that hold the arms are highly fragile. The cutouts where the arms screw in are very thin and are only as large as the arm connector themselves making them highly breakable should the effector get caught and strain the printer temporarily. They don't offer just the little plates and at $34 plus shipping it's quite expensive and unreasonable to buy more than $30 in parts for the one little plate to replace the fragile plate with ANOTHER FRAGILE PLATE.... So instead I spent dome time mocking up the carriage plates and as long as you still have the 5 screws, 3 nuts, 6 spacers and 3 wheel bearings you should be fine. Simply print these, screw them in and slide them on. The improvement is tha