Demon slayer Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 127.27x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Sunlu Purple Transmission Distance: 7.4 PLA Sunlu Yellow Transmission Distance: 6.2 PLA Polymaker ploy sonic pro White Transmission Distance: 7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Purple At layer #17 (1.44mm) swap to Yellow At layer #28 (2.32mm) swap to White for the rest.