Demon Slayer - Inosuke HueForge

Inosuke HueForge designed by ColorMatch, so that, it's using 7 colours. If you're using AMS, I've setup the profile with a pause to replace:Black → BrownBlue → BeigeGreen → Redkeeping White. This way, take advantage of the pause to replace the 3 colours described in your AMS. If you opt for No AMS, you can just use the profile without pause and change the spools at every change colour configured in the printing process. -----Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 114.37x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Red Transmission Distance: 4This