Demon Slayer - Inosuke

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mmThe Model is 131.29x230mm in sizeYou may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 2.6 PLA Bambu Basic Bronze Transmission Distance: 0.7 PLA Bambu Metal Copper Brown Transmission Distance: 0.5 PLA Bambu Metal Iridium Gold Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA PolyLite Pro Cold White Transmission Distance: 0.5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #24 (1.16mm) swap to Blue Gray At layer #25 (1.2mm) swap to Bronze At layer #29 (1.36mm) swap to Copper Brown At layer #33 (1.52mm) swap to Iridium Gold At layer #43 (1.92mm) swap to Jade White At layer #47 (2.08mm) swap to Cold White for the rest.