Demon Slayer Light Box (back shell is separate)

Made this for a friend's daughter. The current light boxes uploaded have the shell connected to the logo side and that wastes a lot of filament if something goes wrong during printing so I made the back shell separate. I have a few variations in the 3MF file, one has a diffuser to help block out any pin holes and the other doesn't. There are also two back shells for mounting on the wall or using the stand. I don't like adding a whole for the cable that connects to the LED strip because each person may use a different configuration. Its just as easy to add a negative part and place it where you need the cable to come out of. I have uploaded a screenshot of my settings for the filaments. I did use @Codyinbody's settings for the lightbox profile and filament profiles since he seems to have them dialed in. The 3mf file has specific settings applied to the front shell only. The back shell and stand will be different. Here are the best printer profile settings for light boxes