Slicer Discord
demon slayer – Modello 3D stampabile da MakerWorld MakerWorld
Hueforge & Lithophane

demon slayer

59 Download
48 Likes
29 Makes
Vai al Modello
Project: Demon Slayer GIrlPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x279.87mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Kexcelled Purple Transmission Distance: 0.6 PLA Kexcelled Fluorescent Red Transmission Distance: 2.6 PETG JAYO White Transmission Distance: 6This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #7 (0.64mm) swap to fluorescent Red At layer #8 (0.72mm) swap to Purple At layer #12 (1.04mm) swap to White for the rest.
Categoria
Hueforge & Lithophane
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Principiante Bassa affidabilità
Pezzo unico
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 0/3
Stampante
FDM / FFF
Formato file
STL
Materiale
PLA, PETG
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione