Denji - Chainsawman

CAREFUL: Use of any PLA grade other than the specified material may change the calibrated transmission distance values and consequently alter the resulting output.ATTENTION: L'utilisation d'un grade de PLA autre que le matériau spécifié peut modifier les valeurs de distance de transmission calibrées et ainsi altérer le résultat obtenu. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 240x208.24mm in size You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.8mm and the Actual Thickness is 2.72mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3#c00d1e PLA BambuLab Basic Red Transmission Distance: 4#ff6a13 PLA Bambulab Basic orange Transmission Distance: 4.4#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5#0086d6 PLA BambuLab Basic Cyan Transmission