Desiccant case

A simple vase mode (quick) desiccant case.
After modeling a screw top container in Fusion360 and printing it, it took 2.5Hours to print i figured a vase mode print could do it just as good...and i was right.
With a bit of fine tuning i managed to get a container that is perfect for the job, plenty strong enough and does the job.

Watch how i made it here
https://youtu.be/SUYI2nuWFUU

I have provided the STL file, a fusion360 export and the 2 GCode files i used to print on an i3 style printer.


Print time: 24min each

Slice 2 versions so they screw together.
1st: Scale: 100%
2nd: Scale: 103%


Material: Natural/Transparent PLA
Nozzle: 0.4mm
Extrude temp: 210c
Build plate: Off
Spiral mode: ON
Layer height: 0.2mm
Flow: 130%
Wall thickness: 0.6mm
Top/Bottom Thickness: 0.4mm
Print speed: 50mm/s
Cooling: 100% (off for 2 layers)

If the print fails as the thread starts (approx 21mm high), decrease layer height and/or increase flow rate.