Desiccated

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Matte Marine Blue Transmission Distance: 0.5PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Beige Transmission Distance: 8This print uses 5 unique filaments. Substitute as needed. Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to Marine BlueAt layer #13 (1.12mm) swap to Jade WhiteAt layer #16 (1.36mm) swap to BlackAt layer #20 (1.68mm) swap to Blue GrayAt layer #22 (1.84mm) swap to BeigeAt layer #23 (1.92mm) swap to Jade White for the rest. Boost MeGot a Boost to spare? Every little bit helps the motivation. Thank you!MembershipWant to go commercial or maybe just show some