Desk Clamp Lamp

This lamp is put in place with a clamp. I made this because I had some smart bulbs lying around. I made it specifically for e27 bulb size. I used a e27 bulb socket holder as reference to make everything in this design.

All the links to buy the bulb and socket is given here. it will in all probability work with whatever you have too.

I have attached a step file with the whole assembly too for any guy who is confused in any step of assembly, probably not.


I also attached the PRINTING INSTRUCTIONS, PLEASE FOLLOW THAT!

You have to buy a few bolts and nuts too:

M3 - 25mm bolt - 4pcs
M3 nuts - 4pcs
M2 - 8mm bolt - 4pcs
M2 nuts - 4pcs


Refer to the assembly.stp for the number of things to print from the file list.

Here's a video - https://www.youtube.com/watch?v=SUoMnuV-tBY

PS: You gotta really tighten the screws. Use two pliers one on both sides and go at it.


Links to products used:

bulbs - 18watts

https://fr.aliexpress.com/item/1005002657974573.html?spm=a2g0s.9042311.0.0.5