Thingiverse
Desk e-ink weather display
321
Download
422
Likes
0
Makes
This is a case for a ESP32-powered weather display detailed in [this project](https://github.com/lmarzen/esp32-weather-epd/).
The mount tray should be printed with supports, everything else without. 0.2 mm layer height.
You will also need:
- Code and hardware detailed in [this github repo](https://github.com/lmarzen/esp32-weather-epd/). I used:
- [Waveshare 7.5 in. E-Ink display with HAT](https://www.waveshare.com/7.5inch-e-paper-hat.htm)
- [FireBeetle 2 ESP32-E](https://www.dfrobot.com/product-2195.html)
- [BME280](https://www.dfrobot.com/product-1606.html)
- [This battery](https://www.adafruit.com/product/328)
- 7 m3x6 + nuts
- 4 m3x8 + nuts
- 6 m2x6 + nuts
v2: modified to make the button easier to press
[Originally posted on printables](https://www.printables.com/model/617446-desk-e-ink-weather-display)
The mount tray should be printed with supports, everything else without. 0.2 mm layer height.
You will also need:
- Code and hardware detailed in [this github repo](https://github.com/lmarzen/esp32-weather-epd/). I used:
- [Waveshare 7.5 in. E-Ink display with HAT](https://www.waveshare.com/7.5inch-e-paper-hat.htm)
- [FireBeetle 2 ESP32-E](https://www.dfrobot.com/product-2195.html)
- [BME280](https://www.dfrobot.com/product-1606.html)
- [This battery](https://www.adafruit.com/product/328)
- 7 m3x6 + nuts
- 4 m3x8 + nuts
- 6 m2x6 + nuts
v2: modified to make the button easier to press
[Originally posted on printables](https://www.printables.com/model/617446-desk-e-ink-weather-display)
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
