Desk lamp

Desk light 650mm tall 720 wide, i used 30 LEDs and powered by 3 x AA batteries, the LEDs are rated at 5V. .For assembly CA glue would be ideal and for the LEDs soldering is required and copper wire, there are 30 LEDs connected in parallel with 2 copper wires.Assembly instruction:the main support pole is composed from 3 section, each section printed in 4 pieces, each joined at the edges a 45°, where CA is applied to assemble (please see 3D exploded images), plate 1 is printed ONCE, plate 3 is printed 4 times,the support for the LEDs is printed in 3 sections and joined with CA glue,after assembling the main support pole and LED housing they are connected by 2 segments/arms (please see 3d exploded views). Every joint is printed with 0 tolerance so it has a friction fit. The connecting segment require 3 x M5 screws, 35-50-65 mm in length and M5 nuts. This will allow for fine balancing adjustment,The LEDs are connected in parallel, rated at 5V and have about 0.8A current draw. I used 3 AA b