Thingiverse
Desktop Crane
por CDeviant
52
Descargas
44
Likes
1
Makes
Roughly 8.5" tall, and 11" long when assembled.
All parts just press fit.
Features a geared mechanism to hoist the guide back and forth. Plus, a ratcheting pulley to prevent the part from slipping down.
All parts are designed to be printed without supports.
This hook made by Snorri would work great as the grabber.
https://www.thingiverse.com/thing:1607199
_________________________________________________________________________
**Parts**
1 rubber band for the ratcheting pulley.
Some small string for the gantry, and crane.
A magnet to grab things.
Not strictly needed, but an 8mm drill bit for cleaning out the mating pin holes on the frame will make inserting the pins much easier.
All parts just press fit.
Features a geared mechanism to hoist the guide back and forth. Plus, a ratcheting pulley to prevent the part from slipping down.
All parts are designed to be printed without supports.
This hook made by Snorri would work great as the grabber.
https://www.thingiverse.com/thing:1607199
_________________________________________________________________________
**Parts**
1 rubber band for the ratcheting pulley.
Some small string for the gantry, and crane.
A magnet to grab things.
Not strictly needed, but an 8mm drill bit for cleaning out the mating pin holes on the frame will make inserting the pins much easier.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!