Desktop e-ink display case

This is a 3D printed desktop mount for an e-ink display. It uses the following parts in addition to the printed parts:

4.2" Waveshare e-ink module:
https://www.waveshare.com/wiki/4.2inch_e-Paper_Module

RPi Zero W:
https://www.raspberrypi.org/products/raspberry-pi-zero-w/

Logic level shifter:
https://www.adafruit.com/product/757

Warm white monochrome DotStar:
https://www.adafruit.com/product/2350

5050 LED breakout boards:
https://www.adafruit.com/product/1762

Miscellaneous M2.5 bolts and nuts

The Waveshare module should be connected to SPI0 as described here:

https://github.com/soonuse/epd-library-python

The 5050 LEDs should then be connected to SPI1 (GPIO 28 and 29) through the level shifter.