Thingiverse
Desktop Risers
di bronkula
146
Download
113
Likes
0
Makes
# Desktop Risers
A set of risers for a tabletop or desktop setup. The base risers will raise a board up, and the middle risers can be placed to rise boards up off of boards.
I made this during Work from home, so that I could turn my table into a standing desk situation. The SCAD file is fully customizable for any board size, riser height, and all the other relevant variables. I hope this helps you out as much as it did me.
## Tips for custom board size
* If you're going to create a variation for a different board size, consider a couple things. Give yourself only about 0.2mm of tolerance. So measure real close, and then keep your print tight.
* Your printer will probably create a ridge around the finger corners. This is actually good, as it will cause the finger to sort of clamp onto the board, but it will mean you have to sort of push to get the risers onto your board.
A set of risers for a tabletop or desktop setup. The base risers will raise a board up, and the middle risers can be placed to rise boards up off of boards.
I made this during Work from home, so that I could turn my table into a standing desk situation. The SCAD file is fully customizable for any board size, riser height, and all the other relevant variables. I hope this helps you out as much as it did me.
## Tips for custom board size
* If you're going to create a variation for a different board size, consider a couple things. Give yourself only about 0.2mm of tolerance. So measure real close, and then keep your print tight.
* Your printer will probably create a ridge around the finger corners. This is actually good, as it will cause the finger to sort of clamp onto the board, but it will mean you have to sort of push to get the risers onto your board.
bronkula pubblica anche su
3 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
