Destiny 2 Telesto

Telesto from Destiny 2, I spent a while trying to find a pre-cut up version of this and only found not great models out there. I was able to pull down the model from Bungie, import into Fusion 360 and cut up using Dove Tail Joints. If you don't want all of the parts you can pull down one side and flip in your slicer as Telesto is mirrored.


As I was removing supports I was a little too aggressive with some of the joints and broke them. This is the reason for the "Filler Piece" and "Dove_REplace" files. You can ignore these or use them if you make the same mistake as me.


I used, a two part modeling compound called 'Apoxie' to glue the parts together, followed by a lot of sanding, a few coats of primer and not my best paint job. Put two protective coats on top.