Devil Chic at War #49

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA+ Numakers Pitch Black Transmission Distance: 0.1 PLA+ Numakers Midnight Gray Transmission Distance: 0.2 PLA+ Numakers Dark Grey Transmission Distance: 0.5 PLA+ Numakers Simply Silver Transmission Distance: 0.5 PLA+ Numakers Light Gray Transmission Distance: 0.7 PLA+ Numakers Ivory White Transmission Distance: 4 PLA+ Numakers Pure White Transmission Distance: 3.3 PLA+ Numakers Cool White Transmission Distance: 1.8 This print uses 8 unique filaments Swap Instructions: Start with Pitch Black At layer #8 (0.44mm) swap to Midnight Gray At layer #18 (0.84mm) swap to Dark Grey At layer #20 (0.92mm) swap to Simply Silver At layer #24 (1.08mm) swap to Light Gray At layer #30 (1.32mm) swap to Ivory White At layer #38 (1.64mm) swap to Pure White At lay