Devil horns on a peaked cap

Make a devil out of yourself! I created several types of devil horns to attach to a peaked cap. There are two versions - straight and curved. For the inner part (in the cap) it would be more appropriate to use TPU. There are four mounting methods: A - just a 2.6mm hole for the screw B - during printing, stop before finishing the hole for the M3 nut with a nylon insert, insert it and continue printing C - during printing, stop before finishing the hole for the M3 nut, insert it and continue printing D - hole for the M3 threaded insert Needed parts: - M3x10 (max. M3x20) countersunk screw - M3 threaded insert 5x5mm or 5x4mm Assembly: - seal the inserts (or use another method A, B, C) - screw the caps on both sides into the ventilation holes Please give a HEART for the download! We like to collect them. ;-) PRINT SETTINGS:Total time → 1 HourNumber of print files → 4 (one cap)Layer height → 0,2Layer width → 0,4Perimeters → 3Infill → 20 %Material → PETG, PLA, TPUTotal weight → 12 g Support t