DeWalt 20v Max Tool Holder
di Photog1
96
Download
57
Likes
1
Makes
Bracket for holding DeWalt 20v Max tools, either on a wall or under a shelf.
11/15/20: v2 uploaded.
This one changes from the previous version, which had three discrete thicknesses, to a standard base with spacers/shims to allow you to mix 'n' match to make your own thickness.
112/18/20
Decreased the diameter of the outside of the alignment pegs very slightly (0.2mm) to allow ease of assembly of spacers to each other and main body.
The standard base works most of the time, but some tools (for example, the cordless orbital sander, with its dust exhaust/vacuum attachment which extends to the rear) are not going to fit properly on the standard one, thus the ability to use spacers to stand the tool off from the surface however much you need to.
The standard base is 5mm thick. Also included are 3mm, 4mm, 5mm & 10mm spacers. These have interlocking pegs to align them and the screw holes. So, if you need an additional 6mm, use (2) 3mm spacers. 7mm would use (1) 3mm and (
11/15/20: v2 uploaded.
This one changes from the previous version, which had three discrete thicknesses, to a standard base with spacers/shims to allow you to mix 'n' match to make your own thickness.
112/18/20
Decreased the diameter of the outside of the alignment pegs very slightly (0.2mm) to allow ease of assembly of spacers to each other and main body.
The standard base works most of the time, but some tools (for example, the cordless orbital sander, with its dust exhaust/vacuum attachment which extends to the rear) are not going to fit properly on the standard one, thus the ability to use spacers to stand the tool off from the surface however much you need to.
The standard base is 5mm thick. Also included are 3mm, 4mm, 5mm & 10mm spacers. These have interlocking pegs to align them and the screw holes. So, if you need an additional 6mm, use (2) 3mm spacers. 7mm would use (1) 3mm and (
Photog1 pubblica anche su
2 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!