Diablo Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x83.35mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed Thickness is 1.92mm and the Actual Thickness is 1.84mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #17 (1.44mm) swap to Sunflower Yellow for the rest.