Diablo HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mm Filaments Used: PLA Smartfil Black Transmission Distance: 0.3 PLA Smartfil Red Transmission Distance: 2.3 PLA Smartfil Transmission yellow Distance: 5.8 PLA Smartfil White Transmission Distance: 6Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #11 (0.96mm) swap to Yellow At layer #14 (1.2mm) swap to White At layer #26 (2.16mm) swap to Red At layer #29 (2.4mm) swap to Yellow At layer #30 (2.48mm) swap to White for the rest.