Thingiverse
Dial indicator Mount for Prusa MK3
por Barbarossi
34
Descargas
15
Likes
0
Makes
Take the part cooling fan and shroud off, and this mount drops right in with 3 M3x16 Screws. The Indicator is right under the Nozzle so you have no trouble reaching all points on the Bed,
neither the PINDA nor the Hotend needs to be taken out/off. The indicator is calmed by two M3x10 Bolts on the Back
Parts "Vitamins" needed:
3 M3x16 Cylinderheadscrews
2 M3x10 Cylinderheadscrews ( or longer, doesn't matter)
2 M3 Nuts
neither the PINDA nor the Hotend needs to be taken out/off. The indicator is calmed by two M3x10 Bolts on the Back
Parts "Vitamins" needed:
3 M3x16 Cylinderheadscrews
2 M3x10 Cylinderheadscrews ( or longer, doesn't matter)
2 M3 Nuts
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!