Dial Indicator Stand

For the base I used the excellent piece Rostock Max V2 Dial Indicator Mount made by Knabo (https://www.thingiverse.com/thing:1607993).
I recommend using a piece of rubber (I cut out a piece of bicycle inner tube) to put as thickness between the two pieces.
You also need one M3x45, one M3 bolts, two M3X10 screws, two M4 screws, two M4 bolts, three parker screws for the wooden base, two M8 steel rods ( I cut them to 25 cm) and a little glue to glue the clip to the rod.
27/09/2023: Upgraded the Dial_Indicator_Right and Dial_Indicator_Left to ver 2, but you must use a square nut 7x7x2mm