Dice Dispenser Modular V1

Dice Dispenser A fixed structure to hold and dispense dice via gravity. This print requires no moving parts, no assembly, no hardware, and no supports. The dimensions for each chamber/chute is exactly 17x17mm, which offers enough headroom for a standard D6 (16x16x16mm) dice to slide down. Without the extension, each chamber holds exactly 5 dice. There are 2 versions: Standard: The standard dice dispenser. Modular with extension adapter: The standard dice dispenser, but with a male adapter at the top which mates to a female extension (not threaded). The extension increases slots vertically for each chamber by 3 dice (see below). Optional Extension I have made 3 different extensions, with different tolerances for each (tight, moderate, loose) to account for different types of printers and filament. The male peg at the top of the dice dispenser is 6mm in diameter and 4mm in height. The tolerances for each female extension peg slot is as follows: Tight: 6.2mm (Perfect fit for calibrated pr