Differential/Skid Steering Chassis

This is a chassis you can use as a starting point for a robotics project.It provides a platform to attach 2 gearmotors to 2 wheels with a caster in the front to balance. Pros:Tons of extra screw holes to mount electronics, batteries etc.. with your own brackets.Mostly printed parts yet reasonably strong.All parts fit within Bambu X/P bed.Easy remix because here is the CAD - https://cad.onshape.com/documents/eea0d15e9e3c86644c471f6e/w/5db2f025dccb5d182f8a3442/e/d2089aca2580d8d13c74baf3?renderMode=0&uiState=6747d097aab40a0523e85ac2Cons:The wheels are not printed nor do I have part numbers. The wheels are a fairly standard 70mm size you just may have to remix the wheel adapter to fit your own wheels. The 70mm diameter is important though for ground and wheel well clearance. I don't suggest printing the wheels unless you are going to get some rubbery material for tires. Two wheel steering is pretty dependent on decent traction.If you don't get the same gearmotors you may have to re