Digimon Hueforge

Project: digimon.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 124.23x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Purple Transmission Distance: 1.4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Grey Transmission Distance: 1 PLA BambuLab Basic Cyan Transmission Distance: 0.5 PLA BambuLab Basic Magenta Transmission Distance: 4.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Purple At layer #13 (1.12mm) swap to Red At layer #17 (1.44mm) swap to Grey At layer #18 (1.52mm) swap to Cyan At layer #19 (1.6mm) swap to Grey At layer #20 (1.68mm) swap to Magenta At layer #22 (1.84mm) swap to Jade White for the rest.