DIM Card-Style Shell for DIM Card Programmer

————————
WIP. This Make has not yet been physically printed. Please be aware that parts may not fit. If you come across any issues with dimensions, let me know. In-fill for the main body shell likely should be between 5-10%, and bottom plate probably 15%-20%
———————-

A DIM Card-esque shaped shell for the black PCB CH341A programmer, from Mr. Blinky’s DIM Card programmer tutorial. Square hole on the rounded edge holds the Micro SD Card. For now the backplate would be secured with an adhesive.

You’ll need to either use a Micro SD card with angled pins to make the SD Card fit, or bend them. If you remove the plastic shield from the pins and bend them you’ll get the best result, I did this to my SD chip, but keep in mind you might damage your SD Card chip if you are too aggressive with it

Unsure if the dimensions will accommodate the green PCB version CH341A programmer.

You’ll need to pull off the little flip handle from the programmer, if you haven’t already.