Dimensional Accuracy Test Print

I print most everything at 0.3 layer height with 3 or more perimeters/top/bottom layers since I only do functional prints and I have found the 20mm square cubes woefully inadequate for calibration so I came up with my own.

Height/depth of text dimensions as well as arrows are factors of my preferred layer height but the actual text dimensions aren't, everything else is whole numbers(10mm, 75 mm etc)

My infill is usually 20-30% and the orientation of the print as printed on the print table should obviously be in accordance with the markings on the print( X lined up with x-axis, Y lined up with Y-axis)