Thingiverse
DIN rail module for custom electronics
von ultimoistante
6
Downloads
3
Likes
0
Makes
This is an handy DIN rail module box for custom electronics. I needed it to hold a simple relay circuit controlled by HomeAssistant.
Quickly sketched in OnShape, taking a commercial DIN rail module as reference. Terminal blocks are standard 2 pins, 5.08 spacing.
You can view the design here: https://cad.onshape.com/documents/d8159173e5a9f173a47253b8/w/665120b3f694d393fa1a7231/e/03ea4b5040f7665403c00346?renderMode=0&uiState=6817946c11642e5a29abffe7
Sorry for the poor print quality, my filament was a bit messy. Printed it in transparent because I need to see status leds behind front face.
Quickly sketched in OnShape, taking a commercial DIN rail module as reference. Terminal blocks are standard 2 pins, 5.08 spacing.
You can view the design here: https://cad.onshape.com/documents/d8159173e5a9f173a47253b8/w/665120b3f694d393fa1a7231/e/03ea4b5040f7665403c00346?renderMode=0&uiState=6817946c11642e5a29abffe7
Sorry for the poor print quality, my filament was a bit messy. Printed it in transparent because I need to see status leds behind front face.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
